RX24型铝外壳功率线绕电阻器
RX24 Type Aluminum Shell Wire Wound Resistors
主要特点：使用金属鋁壳散热器，体积小、功率负荷大。由于采用了硅酮树脂或硅砂树脂封装，产品具备了良好的绝缘性能和理想的导热功能。适用于在散热板上安装。
Chief Characteristic: Due to use metal aluminum shell radiator therefore, they are possess small value high power load. Due to the adoption of silicone resin or silica sand encapsulation, the products with good insulation performance and the ideal thermal conductive function. Suitable for cooling plate installation.
主要用途：一般用于直流或低频交流电路中。若用于高频电路时，应订购无感电阻器，订货时需声明，无感电阻器在产品标志前加“N”。
Chief Purpose: Used in DC or low frequency AC circuits. If used in high frequency circuit, it shall order non-inductive resistor, need to declare when you order it, non-inductive resistor with "N" in front of the product logo.
外形图/Contour Drawing
技术标准/ Technology Standard
1. GB/T 5729-2003
2. Q/QH1633-2014
结构尺寸/Structure Size
使用注意事项/Using Note：
电阻器使用时应配备相应规格的散热散热板/器，如无配备，功率负荷应减半。
When using the resistor, you should be equipped with the corresponding stallone of the heat radiator panels, if no equipped with, the power load should be cut in half.
功率负荷曲线
Power Load Curve
主要性能参数/Chief Property Parameters
认证试验主要试验项目及要求
Chief Testing & Testing Requirements for the Authentication Testing
